ND Miata

Replace your standard stock valve cover bolts with this beautiful stainless steel bolt kit! Includes all stainless bolts and cup washers in a variety of colors.

• 15 x Colored Cups
• 15 x Long Bolts
• 15 x Threaded Standoffs

Installation Video:

This trunk with ducktail replaces the OEM Miata aluminum trunk. Made with high quality carbon fiber, it only weighs 3.5 KG (7 Pounds). It replicates the ND trunk exactly including the inner structure, and its ducktail finishes the rear of the RF perfectly, making it more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Freight charges are additional and will be billed separately.

*Please Note*

This product has a lead time of up to 60 days

This trunk with ducktail replaces the OEM Miata aluminum trunk. Made with high quality carbon fiber, it only weighs 3.5 KG (7 Pounds). It replicates the ND trunk exactly including the inner structure, and its ducktail finishes the rear of the soft top perfectly, making it more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

*Please Note*

This product has a lead time of up to 60 days

This carbon fiber rear diffuser fits on top of the rear plastic valence on all ND Miatas with OEM exhaust. Made with high quality carbon fiber, it only weighs 2 kg.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Freight charges are additional and will be billed separately.

*Please Note*

This product has a lead time of up to 60 days

This vented carbon fiber hood replaces the OEM aluminum one and cuts a third of the weight. Rain guards are included with each piece to close off the vents. However, Carbon Miata drove in the rain without them and had no issue.

3K weaving. CF + UV resistant varnish, gloss clear coat paint (made using vacuum bag process)

Easy to install: perfect fitment using factory mounts. You can reuse the 4 OEM screws and the front latch.

Contact us at with your postal code for an accurate shipping quote. Average shipping for the item is $750-$850. You will be required to choose a freight shipping option from the drop down menu. If the cost of freight exceeds the option you chose, your order will not ship until the difference is covered.

*Please Note*

This product has a lead time of up to 60 days

These side sills are perfect to finish the sills nicely and make the car looks lower and more aggressive.

Specifications for the carbon fiber version:

• 3K Carbon Fibre 1×1 twill (Made in Japan)
• 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Screws supplied

*Please Note*

This product has a lead time of up to 60 days. This item does not ship for free and freight is required!

This lightweight exhaust muffler with oval tip is made with stainless steel 304. Carbon Miata designed it to be the simplest solution to cut weight at the back of your car.

• Lightweight construction (6 pounds – 2.7 kg)
• Perfect for Autocross and track days
• 304 Stainless steel construction
• Perfect fitment with OEM diffuser or with Carbon Miata's carbon fiber diffuser
• TIG welded
• Growling, aggressive sound (check out Carbon Miata's video)
  
• 60 mm diameter piping

*Please Note*

This product has a lead time of up to 60 days

This lip gives a great look to the front of your car. Fitment is very easy.

• Made with high quality fiberglass or carbon fiber/forged carbon fiber/carbon kevlar

• Mounts easily under existing bumper with screws (not supplied)

• Fits on original factory bumper

• Enhances the appearance of your car.

• Super light weight.

*Please Note*

This product has a lead time of up to 60 days

The Edelbrock Stage 1 Street Supercharger system #15540 (No Tuner) for 2016-18 Mazda MX-5 Miata increases the performance of your SKYACTIV -G 2.0L engine to 198 horsepower and 182 ft-lbs of torque at the rear wheels.

Its unique design allows for maximum flow, while retaining great daily driving characteristics. It has been designed from the ground-up and utilizes the Eaton R900 TVS rotor assembly for maximum efficiency in a compact package. To cool the incoming air, is an air-to-water intercooler and heat exchanger.

All these features help the Edelbrock deliver dramatically improved performance with a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating for a unique look that will let everybody know your car is Edelbrock powered!

Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program. For safety, the Edelbrock-supplied program will retain the factory vehicle speed limiter setting. Increases horsepower by 41% and torque by 36% over stock. Unique compact design fits under the stock hood. Supplied with preformed hoses for ease of installation - no trimming needed. Bolt-on installation - everything fits right out of the box with no cutting or welding needed.

Features Eaton Gen VI R900 TVS rotor assembly; the same high-quality rotors used by many OEM manufacturers. Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required). Integrated bypass valve for minimal decrease in fuel economy. Available with a FREE 3-year 36,000 mile powertrain warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.

Carbon fiber bumper ducts to finish the front of the car perfectly and make the car look a lot more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Shipping is not included on this item!

*Please Note*

This product has a lead time of up to 60 days

Extra light carbon fiber side sills to give an extra touch to your interior. Perfect alignment with the Miata door sills. Those are not covers but full replacements!

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Shipping is not included on this item, and will be billed separately.

*Please Note*

This product has a lead time of up to 60 days

These covers fit on the side mirrors of your ND.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

High grade 3M double side adhesive will be supplied with every piece for easy and reliable installation.

*Please Note*

This product has a lead time of up to 60 days

These side skirts are perfect to finish the sills and make the car look lower.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
  
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Easy to install: perfect fitment on the OEM sills. You can drill through the skirts or use some polyurethane adhesive sealant to bond the skirts to the sills. 3M double side adhesive supplied for the top part of the sills.

*Please Note*

This product has a lead time of up to 60 days

These lightweight carbon fiber canards will direct the airflow above the wheels, giving you better aero.

Perfect fitment on OEM bumper. 3M double side adhesive is included, but for maximum strength, rivets/screws are recommended.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

*Please Note*

This product has a lead time of up to 60 days

These fender flares fit perfectly on your existing fenders. Made with high quality carbon fiber, they are perfect for those wanting to run wider wheels (+35MM all around).

They lend themselves to a wider, more aggressive look. Carbon Miata attached a lot of importance to the fitment of this piece to ensure ease of installation. No DIY, trimming required! Only sanding, painting and fitting!

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Weight: 0.3 kg/side for carbon fiber

Sold in sets of four.

*Please Note*

This product has a lead time of up to 60 days

This lightweight carbon fiber gas lid cover sticks on your existing cover for a racing style.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Lightweight, only 20 grams

Looking for that secret edge? Flyin' Miata's billet aluminum sway bar brackets are lighter and stiffer than the ones that come with our bars. Plus they're less likely to end up with the bolts pressed up against the edge of the bracket - if that's happened to you, you know what we're talking about. No more messing around with inexpensive bent steel brackets, these drop right in to place with a nice flat surface to mate up to the mount. Anodized matte black.

The opening is 39 mm (1.535") wide and 48 mm (1.890") tall at the tallest point. Fits the oversize bushings used on front FM sway bars. Includes new hardware.

Looking for that secret edge? Flyin' Miata's billet aluminum sway bar brackets are lighter and stiffer than the ones that come with their sway bars. Plus they're less likely to end up with the bolts pressed up against the edge of the bracket - if that's happened to you, you know what we're talking about. No more messing around with inexpensive bent steel brackets, these drop right in to place with a nice flat surface to mate up to the mount. Anodized matte black.

The opening is 32 mm (1.26") wide and 32 mm (1.26") tall at the tallest point. Fits the bushings used on rear FM sway bars. Includes new hardware.