Mazda Protege Drivetrain

Rev faster with this lightweight flywheel from Fidanza.

A Fidanza flywheel can mate with any type of clutch material, including organic, kevlar, ceramic, metallic and sintered iron. We attach the friction surface with military grade aerospace fasteners. The ring gears are made from 1050 steel and are heat treated for durability. The gears are heated then pressed on and secured with grade 8 button screws. We were the first to use a stepped dowel system in most of our flywheel applications. This doweling method ensures that once the pressure plate is installed the dowels cannot be removed because they become locked into place. No chromemoly can compete with the awesome serviceability, strength and superior design of Fidanza's aluminum flywheels. If there was a better material out there, we would be using it.

• Fits all 1999+ 2.0L Manual Transmission Mazda Proteges
• Includes replacable friction surface.
• Weight: 7lbs

Key Features:

• Designed for Street & Performance Vechicles
• High Quality, Race Proven Performance
• Rear End and Manual Transmission Application
• Neo Gear oils offer the following advantages over it's competition:
• Exceptional Thermal Stability
• Excellent Shear Stability
• Lower Operating Temperatures
• Reduce Wear, Greater Parts Life
• Seal and Gasket Compatibility
• Increased Mileage
• Excellent Low Temperature Flow
• Race Proven Performance
• Outstanding Power Transfer Performance
• 75-90 HD

• Made from imported Japanese Steel
• Forged and Cryo-Tempered for unsurpassed toughness
• Advanced Shot Peening technology increases surface hardness
• Designed to withstand the extreme shock loads of competition-level Drag Racing
• Advanced gear geometry designed using industry-leading software puts more power to the ground
• Only the highest quality Brighton-Best Hardware is used
• Maintenance-free Gears eliminates the need for special fluids & rebuilds associated with plate-type LSDs
• Lock-free operation ensures no adverse affect to steering response
• Hardware included

Break a shifter fork, gear, or have a beat up old transmission? Feel the way we do about the transmission that just broke in your Protege? Replace it with a good, used transmission, fully assembled and ready to drop in. These will fit any 2.0L FS-DE based Protege with a manual transmission.

Have a MazdaSpeed Protege or want to upgrade to a transmission with a limited slip differential? Upgrade to the MazdaSpeed transmission below (note: unless your car has ABS, you will need to install a speed sensor into the transmission).

Transmissions are shipped via freight and do not qualify for free shipping. Your order will ship when additional shipping fees are paid in full.

EXEDY Globalparts Corporation, distributes standard, heavy duty, sports performance and racing clutches. EXEDY Globalparts Corporation is a subsidiary of EXEDY Corporation. EXEDY is indeed one of the worlds leading manufactures of automotive clutch assemblies. We consistently deliver first rate quality and service to top vehicle manufacturers across the globe who demand only the best when installing their manual transmission packages.

In the automotive aftermarket, EXEDY products are sold over the counter in over 80 countries. EXEDY, a Japan-base corporation, has manufactured EXEDY and Daikin brand clutch assemblies along with other drive train components for over 75 years. EXEDY products have been present in the North America since 1968 under the Daikin name, EXEDY and Daikin Clutch products have been manufactured in the United States since 1988 to serve both Original Equipment and aftermarket customers in North, Central, and South America.

This clutch holds almost 40% more horsepower and torque than the stock Mazdaspeed clutch and is suitable for all but the most exacting applications.

This clutch will fit any 2.0L Protege from 2001-2003.5

Spec clutch for 2001+ Mazda Protege/Turbo 365 ft/lb torque capacity. Built to order, please allow 2 weeks for delivery.

OEM Replacement clutch for Mazda Protege.

Quaife ATB Helical LSD differential for the Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) is for a variety of models. A direct replacement for the standard Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) open differential, the Quaife ATB Helical LSD differential transforms your car’s performance. Unlike a conventional plate-style limited slip differential, the Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) Quaife ATB Helical LSD differential relies on gears rather than clutch plates for its operation. That means it is much smoother in operation. The Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) Quaife ATB Helical LSD differential never locks harshly with a set pre-load of wheel slip across the driven axle, like a conventional LSD. Rather, the Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) Quaife ATB Helical LSD differential automatically biases the torque away from the spinning wheel across the axle, to a constantly varying degree, and never locks. The Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) Quaife ATB Helical LSD differential has many benefits over a standard open differential, including maximising traction and minimizing wheel spin, eliminating torque steer and snatching in front wheel drive cars compared to conventional LSD units, and a maintenance-free design which retains the standard oil lubrication. The Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) Quaife ATB Helical LSD differential is proven in circuit and drag racing, rallying and road use, and is produced from Corus steel billets, and is CAD designed and CNC machined, then inspected to ISO 9001 standards. With over 250 applications - the Quaife ATB Helical LSD differential is the best option to utilise your cars performance. Quaife ATB Helical LSD differentials are used by Ford, General Motors and Daimler-Chrysler as original equipment. The Quaife ATB Helical LSD differential for Mazda Protege LX (90-94), ES (01-03), Protege 5 (not 99-00) (G-Type trans) is also now subject to a lifetime warranty (subject to terms and conditions).

EXEDY Globalparts Corporation, distributes standard, heavy duty, sports performance and racing clutches. EXEDY Globalparts Corporation is a subsidiary of EXEDY Corporation. EXEDY is indeed one of the worlds leading manufactures of automotive clutch assemblies. We consistently deliver first rate quality and service to top vehicle manufacturers across the globe who demand only the best when installing their manual transmission packages.

In the automotive aftermarket, EXEDY products are sold over the counter in over 80 countries. EXEDY, a Japan-base corporation, has manufactured EXEDY and Daikin brand clutch assemblies along with other drive train components for over 75 years. EXEDY products have been present in the North America since 1968 under the Daikin name, EXEDY and Daikin Clutch products have been manufactured in the United States since 1988 to serve both Original Equipment and aftermarket customers in North, Central, and South America.

This clutch holds far more horsepower and torque than the stock Mazdaspeed clutch and is suitable for all but the most exacting applications.

This clutch will fit any 2.0L Protege from 2001-2003.5

Pressure plate only, 1999+ 2.0L MAZDA PROTEGE, Does not include clutch.