Incredible fit, classic design, carbon fiber finish and Do-Luck quality.
A collaboration between Bulletproof Automotive and Do-Luck Japan.
*Please note that due to the constant fluctuation of the YEN, prices are subject to change at any time and listed prices are estimates only. If at the time of the order there is a price fluctuation either up or down, you will be notified.
**These are special order items only and take an approximate 2-6 Months to deliver. There are no cancellations on special order items, please contact us for more information or pricing. Shipping is to be invoiced separately. If you have any questions please contact us.
The ETS Evolution X Recirculated O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated wastegate dump for stock like sound under wide open throttle. This downpipe has been engineered to be one of the highest flowing downpipes on the market with a CNC tapered flange that matches the turbine outlet perfectly.
Features:
Split Wastegate and Exhaust Design
Includes 1 studs and 1 nuts for easy install ( Reuse factory studs )
Includes Gasket for a perfect seal
Factory o2 sensor location
Optional wideband bung available
CNC flange matches the turbine housing perfectly for the smoothest flow possible.
The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube. With a built in dowel pin and precise inner diameter to make a 100% seal with the rubber grommet, this piece installs and fits as if it had a Mitsubishi part number. The system is then braced to the chassis with an aluminum bracket to ensure no movement or vibration. A single-piece mandrel bent 3" intake pipe makes the connection between the MAF and turbo with a smooth transition recirculation fitting for an easy connection to the BOV discharge.
Titanium Steel spark plug cover for the Evo X, Ralliart, and Lancer.
Designed for optimum fitment with the oem aluminum valve cover, this spark cover not only looks great, but isolates the coil packs from the heat of the exhaust manifold and turbo. Bolts on in seconds. Includes stainless steel hardware.
If you're making over 400whp, you'll want these upgraded pulleys to keep your serpentine belt intact! The Mitsubishi OEM pulleys are made from plastic and will permanently distort with big power, causing your belt to walk and shred time and time again. Don't leave yourself stranded and constantly in need of a new belt. Fix the problem by installing these steel pulleys.
Note: The pulley that goes onto the OEM belt tensioner will require the use of the provided washers to ensure proper the clearance for the pulley to fit.
Revised and upgraded OEM timing chain for the Evo X. Since the original OEM timing chains were prone to stretch, Mitsubishi released heartier this timing chain to minimize stretch and increase lifespan.
Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. This spring has the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
Rev faster
Lighter components
More durable design
Less stress on valvetrain components
Lower spring frequency for more precise valve control.
More valve control equals more aggressive cam profiles
All of these items help to return more power for you to enjoy!
The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams.
5042 Beehive spring pressure
Seat=70 lbs / .400"=170lbs / .550"= Coil bind.
5042 Beehive Rev and Boost range (using an S2 profile camshaft set)
The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on the market! The award-winning patented DirectDigital™ technology we use is faster and more accurate than common “UEGO” gauges and is now more affordable! In addition, the gauge features a water resistant casing, interchangeable faceplates and bezels, and 2 fully programmable linear analog outputs for use with aftermarket engine managements systems and dataloggers!
KEY FEATURES
The only 100% digital wideband air/fuel ratio technology!
Water Resistant 52mm (2 1/16”) round dash-mountable casing is perfect for automotive, powersports, marine, and demanding racing applications
Built-in Direct Digital™ Wideband Controller reduces wiring and simplifies installation (No LC-1 required)
Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)
Ability to calibrate O2 sensor for increased accuracy
(2) 0-5v fully programmable linear analog outputs for use with engine management systems “closed-loop” and external dataloggers
Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display
Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor Cometic offers a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
SSP Pro Gold is a high-tech transmission fluid developed from the latest base oil and additive technology. Created especially for the newer DCT transmissions, Pro Gold exceeds clutch friction and wear protection requirements for all DCT transmissions. Pro Gold fluid is a extreme performance synthetic fluid suitable for use in all DCT set ups, and is specially formulated to protect your transmission in daily driving to full Race applications.
Have your car professionally tuned by Dino @ SpeedCircuit via email.
How it works
Purchase this item. In the comments field, list the year and trim of your Evo X, along with every modification to the car which could effect performance. This includes, but is not limited to engine modifications, wheels, tires, intake, exhaust, weight reduction, fuel system, etc.
Depending on the extent of your modifications, you may be required to pay additional fees for your tune. Items such as upgraded fuel systems, turbos, larger MAF housings, and so on will require much more time and calibration, hence, added cost.
You will be emailed a starter tune. You will be asked to download this tune to your ECU and log certain parameters in certain conditions.
Email us the logs, and you will receive an updated tune. The process of logging and updating your tune will continue until the tune is complete. An entry level tune will have a maximum of 15 versions for the above price.
Note: The tunes are the intellectual property of SpeedCircuit, and may not be shared with anyone without written consent. Furthermore, it is the responsibility of the owner to ensure that the car is mechanically sound. SpeedCircuit is not liable for any damages that may occur to your car. E-Tunes are done at your risk.
Requirements
Laptop Computer
Tactrix OpenPort 2.0 Cable w/ EvoScan OR a Cobb Accessport
If you wish to use the ECUFlash method of tuning but do not have a Tactrix 2.0 cable, you can purchase one here.
A knowledge and understanding of how a car works mechanically, in order to be able to track down potential issues.
If it is suspected that your car has mechanical issues, you will be asked to address them or have a professional do so. If you do not look into suspected mechanical issues, we will not be able to resume tuning your car until you do. It is not the responsibility of the tuner to diagnose any mechanical issues.
Recommended
An Innovate or AEM Wideband O2 gauge with logging cable (required for all non-stock turbo tunes). If logging with a serial cable, we recommend a plugable USB to serial adapter which is available on amazon. If you are going to log via an analog connection, which is the only current way to log via Cobb AccessPort, see here for wiring instructions.
A boost gauge
Det cans to hear potential knock with.
What to log
Wideband (only if you have a wideband O2 gauge installed)
Throttle Position (TPS)
RPM
Load
Boost
Baro (if required by boost)
Knocksum
Timing Advance (ignition)
Active WGDC Correction
Odd Clutch Slip Speed (if tuning SST)
You may be asked to log more items as the tune progresses.
Please be sure to only do one full throttle pull per log. The pull should be from 3200-7000rpm unless specified otherwise.
Warning: E-Tuning requires that the driver of the car be aware of potential issues that may arise during tuning. This may include the car running lean, overboosting, detonating, or any other mechanical issues. If something doesn't feel right, take your foot off the throttle immediately and end the pull. SpeedCircuit, LLC is not responsible for any damages your car may incur! If you are not comfortable with this, please visit us for an in-person tune.
Expect an average of one new tune file per week. This will vary based on both our schedule and how quickly you can provide logs for the most recent update to your tune. There may be times where we may be unavailable, so on occasion there may be weeks where we are not available for e-tuning.
If you're not familiar with how to set up your car or computer to log or flash tunes on your car, or you need help with diagnostics, please check the Phone Support option.
Note: Once an initial base map has been sent to you, there are no refunds.
Kelford Cams, world leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilising ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in EVO engine development.
Kelford Cams, world leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilising ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in EVO engine development.
Kelford Cams, world leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilising ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in EVO engine development.
Stainless steel heat shield for your exhaust cam sensor. Designed to protect your cam sensor from damage, especially when running tubular manifolds where the runner is very close to the sensor. Fits any manifold we've tried so far, even the Full Race!
