Have your car professionally tuned by Dino @ SpeedCircuit remotely.
How it works
- Purchase this item. In the comments field, list the year and trim of your Evo X, along with every modification to the car which could effect performance. This includes, but is not limited to engine modifications, wheels, tires, intake, exhaust, weight reduction, fuel system, etc.
- Depending on the extent of your modifications, you may be required to pay additional fees for your tune. Items such as upgraded fuel systems, turbos, larger MAF housings, and so on will require much more time and calibration, hence, added cost.
- You will be emailed a base map for your starter tune. You will be asked to download this tune to your ECU and log certain parameters in certain conditions.
- If your car requires scaling or calibration (due to a larger fuel system, maf housing, etc) you have the option of emailing logs before our tuning session begins in order to maximize your tuning time.
- Schedule a day and time to perform the remote tune. It is your responsibility to ensure that your car is mechanically sound before this tuning appointment. If the car has a mechanical issue which forces us to terminate the tuning session early, you will not be refunded. We may be able to reschedule to use your remaining time, however this is a case by case basis.
Note: The tunes are the intellectual property of SpeedCircuit, and may not be shared with anyone without written consent. Furthermore, it is the responsibility of the owner to ensure that the car is mechanically sound. SpeedCircuit is not liable for any damages that may occur to your car. E-Tunes are done at your risk.
Requirements
- Laptop Computer
- Tactrix OpenPort 2.0 Cable w/ EvoScan OR a Cobb Accessport
- If you wish to use the ECUFlash method of tuning but do not have a Tactrix 2.0 cable, you can purchase one here.
- A knowledge and understanding of how a car works mechanically, in order to be able to track down potential issues.
- If it is suspected that your car has mechanical issues, you will be asked to address them or have a professional do so. If you do not look into suspected mechanical issues, we will not be able to resume tuning your car until you do. It is not the responsibility of the tuner to diagnose any mechanical issues.
Recommended
- An Innovate or AEM Wideband O2 gauge with logging cable (required for all non-stock turbo tunes). If logging with a serial cable, we recommend a plugable USB to serial adapter which is available on amazon. If you are going to log via an analog connection, which is the only current way to log via Cobb AccessPort, see here for wiring instructions.
- A boost gauge
- Det cans to hear potential knock with.
What to log
- Wideband (only if you have a wideband O2 gauge installed)
- Throttle Position (TPS)
- RPM
- Load
- Boost
- Baro (if required by boost)
- Knocksum
- Timing Advance (ignition)
- Active WGDC Correction
- Odd Clutch Slip Speed (if tuning SST)
You may be asked to log more items as the tune progresses.
Please be sure to only do one full throttle pull per log. The pull should be from 3200-7000rpm unless specified otherwise.
Warning: Remote Tuning requires that the driver of the car be aware of potential issues that may arise during tuning. This may include the car running lean, overboosting, detonating, or any other mechanical issues. If something doesn't feel right, take your foot off the throttle immediately and end the pull. SpeedCircuit, LLC is not responsible for any damages your car may incur! If you are not comfortable with this, please visit us for an in-person tune.
Note: Once an initial base map has been sent to you, there are no refunds.
This video explains our e-tuning process:
