Damping technology with individually adjustable rebound
Rebound adjustable
Inox line stainless steel technology
Individually height adjustable
Backed by a limited lifetime warranty
Optimal performance, individual lowering range and outstanding driving dynamics, these are the characteristics of a KW suspension coilover kit. The ideal system for customers wishing to rely on the experience of engineers to set the damper setting, yet determine their own degree of lowering. In extensive driving tests the engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.
If you're making over 400whp, you'll want these upgraded pulleys to keep your serpentine belt intact! The Mitsubishi OEM pulleys are made from plastic and will permanently distort with big power, causing your belt to walk and shred time and time again. Don't leave yourself stranded and constantly in need of a new belt. Fix the problem by installing these steel pulleys.
Note: The pulley that goes onto the OEM belt tensioner will require the use of the provided washers to ensure proper the clearance for the pulley to fit.
With over a year of research and development time, Mishimoto has created the most effective oil catch can on the market. The Mishimoto Baffled Oil Catch Can was designed to separate oil particles from the PCV air that would normally have just been routed back to your intake.
With over a year of research and development time, Mishimoto has created the most effective oil catch can on the market. The Mishimoto Baffled Oil Catch Can was designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. Custom grooves in the catch can’s inlet turbulates the air longer and ensures all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions.
The 100% billet, 6061 aluminum can accepts –AN fittings at the inlet, outlet, and drain area allowing over 27 possible configurations. For maximum fitment options, the top cog mounting setup allows the can to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for –AN return to the oil pan. The can is also 100% washable, unlike many other cans that require you to replace your filtration system. The Mishimoto Baffled Oil Catch Can is available in a variety of colors as well, so it will be sure to match your style and taste!
Turbosmart race port blow-off valves provide greater performance through faster turbo spool-up from idle, along with reduced turbo lag between gears.
Turbosmart race port blow-off valves are designed for use on large-capacity turbocharger systems and high-horsepower engines. These are the largest and highest-flowing BOVs in the Turbosmart lineup. Featuring a unique collar design, small size, and lightweight construction, Turbosmart race port blow-off valves provide greater performance through faster turbo spool-up from idle, along with reduced turbo lag between gears. Turbosmart race port BOVs are ideal for circuit and drag vehicles and trucks.
Revised and upgraded OEM timing chain for the Evo X. Since the original OEM timing chains were prone to stretch, Mitsubishi released heartier this timing chain to minimize stretch and increase lifespan.
These valves feature avionics-quality hard chrome along with a specially applied hard tip. Our engineering staff at Ferrea spends countless hours conducting flow bench tests to achieve an optimum balance of flow, velocity and efficiency in the design of this valve. As a result, these valves incorporate smoother radius and unique undercuts.
These valves have special aerospace quality alloys, including EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminated any damage to the material structure. The valves are then heat treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip. Our engineering staff at Ferrea spends countless hours conducting flow bench tests to achieve an optimum balance of flow, velocity and efficiency in the design of this valve. As a result, these valves incorporate smoother radius and unique undercuts.
These exclusive features are what make the Ferrea Competition Plus Valves unequaled in performance and reliability!
Intake Valve Specs
Head Diameter = 36mm
Stem Diameter = 5.47mm
Overall Length = 113.25mm
Tip Length = 4.24mm
Exhaust Valve Specs
Head Diameter = 30mm
Stem Diameter = 5.46mm
Overall Length = 105.9mm
Tip Length = 2.32mm
*Includes 8 intake valves (F2176P) and 8 exhaust valves (F2174P)
The GrimmSpeed™ Mitsubishi EVO Boost Control Solenoid is designed to work with your factory computer (requires tuning). It will not reduce the life of your factory computer because it is designed to draw the same amount of power as the factory BCS but flows better and reacts faster. It plugs in and requires no splicing or soldering of resistors. With the included bracket you can bolt it in, plug in the connector, and start tuning for fast boost response, increased boost pressure and free up lots of power. Planning on returning the car to stock? Just reverse installation.
Why run an Electronic BCS over a Manual Boost Controller?
A MBC allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm thats what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control. Revolutionizing the EVO boost solenoid market, we have created model specific install brackets that allow you to directly fit our Boost Solenoid into your EVO for a factory fit. No more Zip-tying! We give you the factory fitment you have been waiting for.
Staying with the OEM fitment theme, our Boost Solenoid uses a EVO style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!
Also new to the EVO boost solenoid market, we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like the plastic hose fittings!
More Features:
Users can use AN fittings with the solenoid.
MAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).
Specifically designed by GrimmSpeed™ to work safely with the factory EVO ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!
The only direct “bolt in” design for the EVO. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)
Faster response and greater flow than any other valve out there. (by more than 10%!)
ARP - The world leader in fastener technology has just released a new Pro Series ARP2000 main stud kit for 2008 and later Mitsubishi 2.0L (4B11) Turbo and Non Turbo applications.
Part No. 207-5403 - includes a set of ten, M10 ARP2000 main studs, a set of ten, M8 ARP2000 main studs, twenty 8740 chromemoly steel 12 pt nuts and a 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant.
All Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 50% increase in tensile strength over the OEM main bolts.
The Fidanza aluminum flywheel is designed to be lightweight and work great and free up your engine's rotational mass. The Fidanza flywheel is unique because it has a replaceable friction surface, so when you need a new flywheel in the future, you can simply replace the low cost friction surface instead of the whole flywheel. Each flywheel comes pre-balanced and ready to be installed. Works with all aftermarket clutches.
The bolts that hold the friction surface to the flywheel are military grade aerospace fasteners so they are ultra strong and durable.
We highly recommend a brand new lightweight flywheel when upgrading your clutch to allow your engine to rev easier and give you the ultimate in performance!
Kit comes complete with 4 pistons, rings, and piston to rod pins and rings. Valve pocket designs maximizes flow around valves. Oversize valves and high lift camshafts can be utilized. Pistons crown shapes designed to promote maximum intake charge efficiency through CROSS FLOW during intake and exhaust valve overlap. Complex Piston skirt profiles and coatings reduce power robbing friction, prolong piston life, and increase horsepower Product Information Wiseco brings over 60 years of experience to the import world. These years include developing pistons in Formula 1, Indy Racing League, and NHRA Pro Stock. This racing technology allows Wiseco to bring the latest innovations in piston technology to the Sport Compact market.
Greddy Performance Products has released a new generation of “Push Type Blow Off Valves,” the GReddy BOV FV. The “FV” stand for Floating Valve, and it is this breakthrough in design that produces quicker valve response, increased valve travel, and improved resistance to premature valve lift and boost leak.
The unique floating valve design incorporates a revised adjustable dual spring system and diaphragm ventilation, while maintaining the advantages of the previous model’s push valve structure and heat resistant silicone diaphragm and valve ratio. This allows the springs and diaphragm to better control the valve and boost.
By relocating one spring under and keeping one over the diaphragm, it makes the need for spring pre- load less dependent on idle and light boost situations and more on keeping the valve closed under boost. The result is our best performing GReddy Blow-off Valve yet! Another improvement includes an adjustable, sliding top hat, to adjust the hose fitting location, without complete dis-assembly. The FV also keeps its overall mounting and outlet dimensions, which means it is compatible with the industry standard two-bolt GReddy BOV flange and can easily replace existing Type RS & RZ applications, as well as use the same optional RS and RZ outlet adapters
100-420hp range
BOV gasket, nuts & bolts
Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters.
Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. This spring has the highest level of spring load retention while still maintaining good fatigue throughout the life of the spring. Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.
The beehive valve spring shape has become the buzz lately. Some have enquired as to the benefits of a beehive spring vs the dual springs that are sold by others. While some might find that the beehive spring design is new it has been used commonly in many OE engines as well as in all of the NASCAR and F1 engines of today. Why? The beehive shape is more stable than standard single or dual cylindrical springs. The beehive design which incorporates an ovate wire is more than capable of the performance demands that were previously only matched by a Dual Springs. With the smaller and lighter retainer used on the beehive valve spring allow for higher RPM and more valve control. So beehive valve springs, with there lighter weight retainers allow for engine's to rev quicker and maintain a more stable valve motion than the traditional cylindrical springs of yesteryear.
Rev faster
Lighter components
More durable design
Less stress on valvetrain components
Lower spring frequency for more precise valve control.
More valve control equals more aggressive cam profiles
All of these items help to return more power for you to enjoy!
The GSC 5042 Beehive valve spring set, and Grade 5 Titanium retainers. This kit is capable of 9500+ RPMS, with as much as 12mm lift cams.
5042 Beehive spring pressure
Seat=70 lbs / .400"=170lbs / .550"= Coil bind.
5042 Beehive Rev and Boost range (using an S2 profile camshaft set)
The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on the market! The award-winning patented DirectDigital™ technology we use is faster and more accurate than common “UEGO” gauges and is now more affordable! In addition, the gauge features a water resistant casing, interchangeable faceplates and bezels, and 2 fully programmable linear analog outputs for use with aftermarket engine managements systems and dataloggers!
KEY FEATURES
The only 100% digital wideband air/fuel ratio technology!
Water Resistant 52mm (2 1/16”) round dash-mountable casing is perfect for automotive, powersports, marine, and demanding racing applications
Built-in Direct Digital™ Wideband Controller reduces wiring and simplifies installation (No LC-1 required)
Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)
Ability to calibrate O2 sensor for increased accuracy
(2) 0-5v fully programmable linear analog outputs for use with engine management systems “closed-loop” and external dataloggers
Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display
Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor Cometic offers a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
SSP Pro Gold is a high-tech transmission fluid developed from the latest base oil and additive technology. Created especially for the newer DCT transmissions, Pro Gold exceeds clutch friction and wear protection requirements for all DCT transmissions. Pro Gold fluid is a extreme performance synthetic fluid suitable for use in all DCT set ups, and is specially formulated to protect your transmission in daily driving to full Race applications.
Have your car professionally tuned by Dino @ SpeedCircuit via email.
How it works
Purchase this item. In the comments field, list the year and trim of your Evo X, along with every modification to the car which could effect performance. This includes, but is not limited to engine modifications, wheels, tires, intake, exhaust, weight reduction, fuel system, etc.
Depending on the extent of your modifications, you may be required to pay additional fees for your tune. Items such as upgraded fuel systems, turbos, larger MAF housings, and so on will require much more time and calibration, hence, added cost.
You will be emailed a starter tune. You will be asked to download this tune to your ECU and log certain parameters in certain conditions.
Email us the logs, and you will receive an updated tune. The process of logging and updating your tune will continue until the tune is complete. An entry level tune will have a maximum of 15 versions for the above price.
Note: The tunes are the intellectual property of SpeedCircuit, and may not be shared with anyone without written consent. Furthermore, it is the responsibility of the owner to ensure that the car is mechanically sound. SpeedCircuit is not liable for any damages that may occur to your car. E-Tunes are done at your risk.
Requirements
Laptop Computer
Tactrix OpenPort 2.0 Cable w/ EvoScan OR a Cobb Accessport
If you wish to use the ECUFlash method of tuning but do not have a Tactrix 2.0 cable, you can purchase one here.
A knowledge and understanding of how a car works mechanically, in order to be able to track down potential issues.
If it is suspected that your car has mechanical issues, you will be asked to address them or have a professional do so. If you do not look into suspected mechanical issues, we will not be able to resume tuning your car until you do. It is not the responsibility of the tuner to diagnose any mechanical issues.
Recommended
An Innovate or AEM Wideband O2 gauge with logging cable (required for all non-stock turbo tunes). If logging with a serial cable, we recommend a plugable USB to serial adapter which is available on amazon. If you are going to log via an analog connection, which is the only current way to log via Cobb AccessPort, see here for wiring instructions.
A boost gauge
Det cans to hear potential knock with.
What to log
Wideband (only if you have a wideband O2 gauge installed)
Throttle Position (TPS)
RPM
Load
Boost
Baro (if required by boost)
Knocksum
Timing Advance (ignition)
Active WGDC Correction
Odd Clutch Slip Speed (if tuning SST)
You may be asked to log more items as the tune progresses.
Please be sure to only do one full throttle pull per log. The pull should be from 3200-7000rpm unless specified otherwise.
Warning: E-Tuning requires that the driver of the car be aware of potential issues that may arise during tuning. This may include the car running lean, overboosting, detonating, or any other mechanical issues. If something doesn't feel right, take your foot off the throttle immediately and end the pull. SpeedCircuit, LLC is not responsible for any damages your car may incur! If you are not comfortable with this, please visit us for an in-person tune.
Expect an average of one new tune file per week. This will vary based on both our schedule and how quickly you can provide logs for the most recent update to your tune. There may be times where we may be unavailable, so on occasion there may be weeks where we are not available for e-tuning.
If you're not familiar with how to set up your car or computer to log or flash tunes on your car, or you need help with diagnostics, please check the Phone Support option.
Note: Once an initial base map has been sent to you, there are no refunds.
BC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to fatigue, losing the spring effect in a relatively short period of time and consistency of sealing pressure, resulting in leakage. BC gaskets are pre-coated stainless steel with a 0.2 micron consistent layer of Nitrile rubber that completely fills the cylinder head surface. Even a newly resurfaced cylinder head and/or block has a surface finish or roughness between 10 to15 microns and this Nitrile rubber completely seals the surfaces at operating engine temperatures, unlike the FKM type which is not suitable for filling the surface roughness because the material has too high of heat resistance. Basically the FKM does not melt to fill into the surface roughness providing the proper seal.
Kelford Cams, world leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilising ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in EVO engine development.
Kelford Cams, world leader in camshaft design and manufacture for high performance Japanese engine makes is set to release their new 4B11 camshafts. Utilising ultramodern design principles, casting techniques and state of the art CNC grinding, these camshafts will again lead the way in EVO engine development.