ND Miata Exterior

This trunk with ducktail replaces the OEM Miata aluminum trunk. Made with high quality carbon fiber, it only weighs 3.5 KG (7 Pounds). It replicates the ND trunk exactly including the inner structure, and its ducktail finishes the rear of the soft top perfectly, making it more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

*Please Note*

This product has a lead time of up to 60 days

This trunk with ducktail replaces the OEM Miata aluminum trunk. Made with high quality carbon fiber, it only weighs 3.5 KG (7 Pounds). It replicates the ND trunk exactly including the inner structure, and its ducktail finishes the rear of the RF perfectly, making it more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Freight charges are additional and will be billed separately.

*Please Note*

This product has a lead time of up to 60 days

This carbon fiber rear diffuser fits on top of the rear plastic valence on all ND Miatas with OEM exhaust. Made with high quality carbon fiber, it only weighs 2 kg.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Freight charges are additional and will be billed separately. Typical charges within the US are $240.

*Please Note*

This product has a lead time of up to 60 days

This vented carbon fiber hood replaces the OEM aluminum one and cuts a third of the weight. Rain guards are included with each piece to close off the vents. However, Carbon Miata drove in the rain without them and had no issue.

3K weaving. CF + UV resistant varnish, gloss clear coat paint (made using vacuum bag process)

Easy to install: perfect fitment using factory mounts. You can reuse the 4 OEM screws and the front latch.

Contact us at with your postal code for an accurate shipping quote. Average shipping for the item is $750-$850. You will be required to choose a freight shipping option from the drop down menu. If the cost of freight exceeds the option you chose, your order will not ship until the difference is covered.

*Please Note*

This product has a lead time of up to 60 days

These side sills are perfect to finish the sills nicely and make the car looks lower and more aggressive.

Specifications for the carbon fiber version:

• 3K Carbon Fibre 1×1 twill (Made in Japan)
• 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Screws supplied

*Please Note*

This product has a lead time of up to 60 days. This item does not ship for free and freight is required!

These covers fit on the side mirrors of your ND.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

High grade 3M double side adhesive will be supplied with every piece for easy and reliable installation.

*Please Note*

This product has a lead time of up to 60 days

This lightweight carbon fiber gas lid cover sticks on your existing cover for a racing style.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Lightweight, only 20 grams

This beautiful ABS plastic injected front grille is inspired from the grille of the Spyder ND which was revealed by Mazda. We decided to make it happen! I took around a year to have it designed and developed but it's now available!!!

Perfect fitment on the OEM bumper tabs. This grille replaces the OEM grille and improve the airflow going to the radiator and engine bay. Be aware that the OEM grille has an upper part which we didn't replicate. You can fit our grille and decide to delete that upper part (in this case, the top of the bumper will be a bit softer) or you can cut the top part attached to the OEM grille and fit it with our grille. Check the picture of the OEM grille by itself!

Be aware that 10 holes are not opened but you can open them yourself if you want!

We are proud to say that the Mazda MX-5 Global Cub is using our grille because it improves the engine cooling and just looks... awesome!
Specifications:
- ABS material
- Glossy black finish
- Strong and resistant
- Reuses OEM tabs, no drilling, no cutting, no modification required on your OEM bumper

Installation guide available at: https://drive.google.com/open?id=1NQa_osBXRlxAZFJXLP7ZflGwJrj0yIQ7

This lip gives a great look to the front of your car. Fitment is very easy.

• Made with high quality fiberglass or carbon fiber/forged carbon fiber/carbon kevlar

• Mounts easily under existing bumper with screws (not supplied)

• Fits on original factory bumper

• Enhances the appearance of your car.

• Super light weight.

*Please Note*

This product has a lead time of up to 60 days

Carbon fiber bumper ducts to finish the front of the car perfectly and make the car look a lot more aggressive.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Shipping is not included on this item!

*Please Note*

This product has a lead time of up to 60 days

These side skirts are perfect to finish the sills and make the car look lower.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
  
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

Easy to install: perfect fitment on the OEM sills. You can drill through the skirts or use some polyurethane adhesive sealant to bond the skirts to the sills. 3M double side adhesive supplied for the top part of the sills.

*Please Note*

This product has a lead time of up to 60 days

These lightweight carbon fiber canards will direct the airflow above the wheels, giving you better aero.

Perfect fitment on OEM bumper. 3M double side adhesive is included, but for maximum strength, rivets/screws are recommended.

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection

*Please Note*

This product has a lead time of up to 60 days

These fender flares fit perfectly on your existing fenders. Made with high quality carbon fiber, they are perfect for those wanting to run wider wheels (+35MM all around).

They lend themselves to a wider, more aggressive look. Carbon Miata attached a lot of importance to the fitment of this piece to ensure ease of installation. No DIY, trimming required! Only sanding, painting and fitting!

• 3K Carbon Fiber 1×1 twill (Made in Japan)
• 45 degree weaving
• Anti-UV gloss clear coating for a long lasting shine and protection
• Weight: 0.3 kg/side for carbon fiber

Sold in sets of four.

*Please Note*

This product has a lead time of up to 60 days