Welcome to SpeedCircuit, LLC!

Hawk HPS Rear Brake Pads Evo X

SKU: HB615F.535

Be the first to review this product

Availability: In stock

$89.00
OR

Quick Overview

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.

Hawk HPS Rear Brake Pads Evo X

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Hawk HPS Rear Brake Pads Evo X

Details

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.

HPS Ferro-Compound Features

Increased stopping power
High friction/torque hot or cold
Gentle on rotors
Extended pad life
Low dust
Virtually noise-free

Note: Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
Bed-In Burnishing Instructions:
1-After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2-Make an additional 2 to 3 hard stops from approximately 40 to 45 mph. DO NOT DRAG BRAKES!
3-Allow 15 minutes for brake system to cool down. Your new pads are ready for use.

Additional Information

Manufacturer Hawk

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.