Welcome to SpeedCircuit, LLC!

Intake & Intercoolers, & Piping

Intake & Intercoolers, & Piping

Items 1 to 20 of 24 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. AEM 3" cone air filter

    AEM 3" cone air filter

    $54.00

    Give your vehicle the power boost it needs with these AEM Dryflow Synthetic Filters. These filters offer 99.4% filtration as small as 1 micron without the use of oil while also helping to increase you gas mileage. Oil-free filters are MAF friendly as they will not pollute your MAF wire with oil, causing your car to run poorly.

    3" inlet with 5" filter element length. Learn More
  2. AEM CAI System For Evo X / Ralliart

    AEM CAI System For Evo X / Ralliart

    $289.00

    FREE SHIPPING AND HANDLING!

    Gain 16hp and 17 lb/ft of torque on a stock Evo X!

    Install time: 2 hours

    Installation instructions

    Learn More
  3. AMS EVO X Front mount intercooler

    AMS EVO X Front mount intercooler

    $729.95

    The AMS Mitsubishi Lancer Evo X Front Mount Intercooler is a direct bolt on utilizing your stock piping and mounting points with purpose built cast end tanks for the Evolution 10. This intercooler has over 80% more internal flow area than its stock counterpart. Provides 10 wheel horsepower over the stock core just by bolting it on, without even re-tuning the ECU! Let the competition know that your EVO means business with a genuine AMS Intercooler but be warned the intimidating AMS logo may scare them off!

    Learn More
  4. AMS Evo X LICP / Cold Pipe *BLACK POWDER COATED*

    AMS Evo X LICP / Cold Pipe *BLACK POWDER COATED*

    $339.95

    The AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5" mandrel bent aluminum tubing. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! This LICP is professionally TIG welded in house and is available polished or black wrinkle powder coated. Learn More
  5. AMS Evo X LICP / Cold Pipe *Polished*

    AMS Evo X LICP / Cold Pipe *Polished*

    $299.95

    The AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5" mandrel bent aluminum tubing. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! This LICP is professionally TIG welded in house and is available polished or black wrinkle powder coated.

    Learn More
  6. EVO X LICP W/ Tial Recirculating BOV *Polished*

    AMS EVO X LICP W/ Tial Recirculating BOV *Polished*

    $699.95

    The AMS EVO X Lower Intercooler Pipe (LICP) with TiAL QR recirculating blow off valve is the perfect solution for those running higher than stock boost levels or larger turbo chargers. The TiAl QR BOV is incorporated to replace the weak OEM diverter valve that leaks under higher boost levels and helps eliminate the running problems commonly found on vehicles that are running blow off valves that vent to the atmosphere.

    Learn More
  7. AMS Evo X UICP / Hot Pipe *BLACK POWDER COATED*

    AMS Evo X UICP / Hot Pipe *BLACK POWDER COATED*

    $339.95

    The AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5 mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2 to 2.5” transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! It also utilizes a silicon hump hose to prevent torn couplers caused by engine movement. Learn More
  8. AMS Evo X UICP / Hot Pipe *Polished*

    AMS Evo X UICP / Hot Pipe *Polished*

    $299.95

    The AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5 mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2 to 2.5" transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! It also utilizes a silicon hump hose to prevent torn couplers caused by engine movement. This UICP is professionally TIG welded in house by master fabricators and is available polished or black wrinkle powder coated.

    Learn More
  9. AMS Mitsubishi Lancer Evolution X Performance Intake

    AMS Mitsubishi Lancer Evolution X Performance Intake

    $359.95

    The exclusive design improves air flow to the turbocharger, increasing horsepower and performance. Learn More
  10. ETS Intake for Evo X

    ETS Intake for Evo X

    $296.00

    The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube.  With a built in dowel pin and precise inner diameter to make a 100% seal with the rubber grommet, this piece installs and fits as if it had a Mitsubishi part number.  The system is then braced to the chassis with an aluminum bracket to ensure no movement or vibration.  A single-piece mandrel bent 3" intake pipe makes the connection between the MAF and turbo with a smooth transition recirculation fitting for an easy connection to the BOV discharge.  

    Learn More
  11. ETS Mitsubishi Evolution X Intercooler

    ETS Mitsubishi Evolution X Intercooler

    $499.00

    This unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and outlet to be at diagonally opposing corners of the core. This provides the best possible airflow distribution through the core's height making sure that all charge rows are used effectively. The AutoCAD drawn endtanks are as smooth as on our previous EVO intercooler with aluminum metal forming that looks more like artwork than endtank. Between the tanks is any one of our sizing options with 3", 3.5" or 4" intercoolers as BOLT-ON designs behind the factory crash beam and above the factory undertray.

    Learn More
  12. High Flow Compressor 3" Inlet ELBOW ONLY for EVO X Turbo

    High Flow Compressor 3" Inlet ELBOW ONLY for EVO X Turbo

    $129.00

    High flow compressor 3" inlet elbow for the EVO X turbo. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, it fits the Garrett GT3071R, GT3076R, or ATP GT35R. 3 bolt flanged. All aluminum, TIG welded construction and wrinkle black powdercoated. Learn More
  13. High Flow Compressor 3" Inlet Pipe set (meets with airbox) EVO X

    High Flow Compressor 3" Inlet Pipe set (meets with airbox) EVO X

    $239.99

    High flow compressor 3" inlet pipe set for EVO X turbo. Includes 3" inlet elbow, 3" couplers, and upper pipe to mate to airbox. All aluminum, TIG welded construction and wrinkle black powdercoated. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, it fits the Garrett GT3071R, GT3076R, or ATP GT35R. Learn More
  14. High Flow Compressor Outlet Pipe for Evo X Turbo

    High Flow Compressor Outlet Pipe for Evo X Turbo

    $99.00

    High flow compressor outlet pipe for Evo X turbo. 2 bolt flanged, progressive tapered and larger diameter. Lightweight aluminum. Contoured machined outlet flange for smooth flow and o-ring flange face eliminates leaks and the 2 bolt gasket for proper seal. Immediately tapers from stock 1.75" diameter to 2.5" diameter and overall discharge area is increased by 100%. Don't upgrade your upper intercooler piping without eliminating this bottleneck out of the turbo! All aluminum, TIG welded construction and wrinkle black powdercoated finish. Learn More
  15. HKS Drop-In Filter Evo X & RalliArt

    HKS Drop-In Filter Evo X & RalliArt

    $45.99

    HKS Drop-In Filter Evo X & RalliArt. Gain horsepower and torque with this drop-in air filter! Takes only minutes to install. Learn More
  16. HKS I/C PIPE KIT EVO X & Ralliart

    HKS I/C PIPE KIT EVO X & Ralliart

    $756.50

    FREE SHIPPING!
    HKS intercooler piping kit for Evo X & Ralliart.
    Comes complete with couplers and clamps. Learn More
  17. Injen Evo X Intake and Upper Intercooler Pipe

    Injen Evo X Intake and Upper Intercooler Pipe

    $529.99

    Features a cast multi-stage tuned mid section for volumized airflow throughout the entire power band. 

    Combined with the upper intercooler piping (included), the system eliminates hose expansion to increase throttle body response going into boost. Dyno proven performance, not hype!

    Learn More
  18. SC 3" Short Ram Intake for Evo X

    SC 3" Short Ram Intake for Evo X

    $329.99

    All aluminum 3" intake supports up to 450whp!

    Learn More
  19. SC 3.5" Goatse Edition Intake

    SC 3.5" Goatse Edition Intake

    $349.99

    3.5" all aluminum intake supports 700+whp!

    Learn More
  20. SC Evo X Stage 1 combo

    SC Evo X Stage 1 combo

    $369.99

    Now get up to speed with two great products for one low package price!

    On our car, we gained 72 extra horsepower to the wheels on a Mustang Dyno.

    Learn More

Items 1 to 20 of 24 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction