Welcome to SpeedCircuit, LLC!

Search results for 'valve cover evo x'

Items 1 to 20 of 477 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. Manley H-Tuff Series Connecting Rods for Evo X 4B11T

    Manley H-Tuff Series Connecting Rods for Evo X 4B11T

    $448.10

    These are a wider, heavier duty versions of the standard Manley H-Beam Rods. Learn More
  2. SpeedCircuit Lightweight Power Steering Pump Pulley for Evo X

    SpeedCircuit Lightweight Power Steering Pump Pulley for Evo X

    Regular Price: $86.99

    Special Price $79.99

    PREODER NOW! These are expected to ship the second week of October, 2019.

    Lower your rotating mass in style with this billet aluminum power steering pump pulley!

    Learn More
  3. StopTech Power Slot Slotted Rear Rotors for Evo X

    StopTech Power Slot Slotted Rear Rotors for Evo X

    $276.22

    Slotted rear rotors for the Evo X. Learn More
  4. StopTech Power Slot Slotted Front Rotors for Evo X

    StopTech Power Slot Slotted Front Rotors for Evo X

    $296.93

    Slotted front rotors for the Evo X. Learn More
  5. MAPerformance Evo X Catch Can / Coolant Expansion Tank

    MAPerformance Evo X Catch Can / Coolant Expansion Tank

    $499.99

    The all-new MAPerformance Catch Can for the Evo X is a full vent to atmosphere catch can designed to eliminate this crankcase pressure. Venting the crankcase properly makes seals & gaskets last longer and reduces oil accumulation in intercoolers and intake piping to ensure your intercooler is operating at an optimal level. It also reduces the resistance against your pistons and is able to free up some hp that your factory system robs you of. Learn More
  6. SpeedCircuit Tuning Appointment Deposit

    SpeedCircuit Tuning Appointment Deposit

    $100.00

    This is a non-refundable deposit that is required to hold a tuning appointment. You may reschedule the appointment without penalty until 48 hours before your appointment. The cost of this deposit is subtracted from your final bill. Learn More
  7. Mishimoto 3.5" Front Mount Intercooler for Evo X

    Mishimoto 3.5" Front Mount Intercooler for Evo X

    $599.99

    • All-aluminum construction
    • Reduce air intake temperatures
    • TIG-welded for increased durability
    • Available in several sizes and colors
    Learn More
  8. Tial QRJ BPV for Evo X

    Tial QRJ BPV for Evo X

    $259.00

    This valve is proven to hold more boost and improve turbo spool over the OEM unit. Learn More
  9. Supertech Valve Guides for Mazda FS engine

    Supertech Valve Guides for Mazda FS engine

    $139.68

    Supertech Valve Guides are precision-machined from high quality Magnesium Bronze material. These guides in combination with low friction nitrated valves provide the best solution for performance and durability. For Exhaust guides for high powered engines that need a better thermal transfer coefficient, we use a copper alloy. Copper has about 3 times higher thermal transfer than Manganese Bronze Learn More
  10.  Supertech Valve Seals for Mazda FS Engine

    Supertech Valve Seals for Mazda FS Engine

    $37.00

    These valve seals are required when using the Supertech Dual Valve Springs and the Supertech valve guides. Learn More
  11.  StopTech Select Sport Drilled and Slotted Rear Brake Rotors for Evo X

    StopTech Select Sport Drilled and Slotted Rear Brake Rotors for Evo X

    $156.99

    StopTech Select Sport Drilled & Slotted Brake Rotors are High Quality drilled and slotted rotors that provide added bite and improved looks for any vehicle. Zinc coating provides improved protection from corrosion extending service life. Learn More
  12. MAP 3" Cold Air Intake for Evo X

    MAP 3" Cold Air Intake for Evo X

    $302.99

    This 3" short ram intake was designed for use with aftermarket lower intercooler pipes such as the AMS and ETS kits. Also works with the stock lower intercooler pipe. These lower FMIC pipes relocate the BOV return closer to the front of the vehicle, making your factory BOV system useless. Furthermore, removal of the recirculated BOV setup requires additional work, such as a tune. This is not always an option for those budget minded individuals. So a convenient aftermarket option was needed.

    The MAPerformance Evo X Intake Kit features a 3" 304 stainless steel tube. Why stainless you ask? It's a well known fact that steel reduces heat absorption compared to aluminum tubing. Lower heat improves power capacity with the stock mass airflow sensor, so our kit will not require tuning or scaling. Capped off with a massive 6" velocity stack, coupled with a high-flow K&N air filter, you'll get maximum induction performance.

    Learn More
  13.  Wastegate Bracket - GT28RS

    Wastegate Bracket - GT28RS

    $39.00

    This wastegate bracket can be used to re-position your wastegate for extra clearance between the manifold and the block on a stock style manifold setup. Learn More
  14. Tactrix Openport 2.0 Tuning Cable for Evo X, etc

    Tactrix Openport 2.0 Tuning Cable for Evo X, etc

    $179.99

    The OpenPort 2.0 is Tactrix's newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined with the EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. Learn More
  15.  Whiteline Front Sway Bar End Links for Evo X

    Whiteline Front Sway Bar End Links for Evo X

    $119.95

    Whiteline Sway Bar Links are adjustable for length via center alloy turnbuckle, suit 10mm ID through-bolt. Kits contains 2x complete link assemblies with dust boots but exclude mounting hardware. Learn More
  16. Goodridge Brake Lines for Evo X

    Goodridge Brake Lines for Evo X

    $149.00

    Get rid of the spongy feel on your brakes with this full set of stainless steel brake lines! Learn More
  17. Supertech Titanium Retainer for Mazda Protege

    Supertech Titanium Retainer for Mazda Protege

    $246.56

    Lightweight titanium retainers for use with Supertech valve springs. Learn More
  18. Boomslang PnP Haltech Elite 1000 wiring harness for Mazda Protege

    Boomslang PnP Haltech Elite 1000 wiring harness for Mazda Protege

    $499.99

    Simplify your life with this Plug & Play harness for your Haltech standalone ECU! Learn More
  19. Haltech Elite 1000 Standalone ECU for 2001+ Mazda Protege

    Haltech Elite 1000 Standalone ECU for 2001+ Mazda Protege

    $1,399.00

    Get the most out of your FS powered Mazda Protege with this standalone from Haltech!

    Learn More
  20. Sanderson Blockhugger headers for LS V8 Swapped Exocet

    Sanderson Blockhugger headers for LS V8 Swapped Exocet

    $365.00

    The V8RLS1 header fits GM LS engines in a variety of 1927-Up cars and trucks, including V8 Mazda Miata and Exomotive Exocet conversions. Learn More

Items 1 to 20 of 477 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction